Skip to main content
logoIstio DistroVersion: Next

How to set up TLS certificates

Learn how to set up Istio ingress gateway with a real SSL certificate

SSL certificates are a must these days. They help protect the data that's sent between the server and the client by encrypting it, which gives your website more credibility. This section will explore a couple of different ways to obtain SSL certificates and configure the Istio Gateway to use them.

We will learn how to manually create a self-signed certificate, followed by obtaining a real SSL certificate and setting that up as well. As you will see, setting all this up is not too complicated.

Prerequisites

For you to follow along, you will need an actual, cloud-hosted Kubernetes cluster. A cloud-hosted cluster is required because we will need an external IP address to hook up a domain name to. Of course, you will also need a domain name.

You can follow the prerequisites for instructions on how to install and setup Istio.

Deploying a sample application

To ensure stuff works as it should, we will start by deploying a simple Hello World web application. If you have your own application/service you want to use, feel free to use that. Otherwise, you can follow along and use the gcr.io/tetratelabs/hello-world:1.0.0 image.

kubectl create deploy helloworld --image=gcr.io/tetratelabs/hello-world:1.0.0 --port=3000

Next, let's create a Kubernetes Service for it.

apiVersion: v1
kind: Service
metadata:
name: helloworld
labels:
app: helloworld
spec:
ports:
- name: http
port: 80
targetPort: 3000
selector:
app: helloworld

Copy the above YAML to helloworld-svc.yaml and deploy it using kubectl apply -f helloworld-svc.yaml.

Note we're not using kubectl expose command because we need to name the ports in Kubernetes services (e.g. http), and we can't do that through the expose command.

To access the service from an external IP, we also need a Gateway resource:

apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
name: public-gateway
spec:
selector:
istio: ingressgateway
servers:
- port:
number: 80
name: http
protocol: HTTP
hosts:
- '*'

Save the above YAML to gateway.yaml and deploy it using kubectl apply -f gateway.yaml.

Note: the hosts field has a value of *. We will change the value of this field after we create the SSL certificate for the domain name. The value will be the actual domain name.

Finally, we also need a VirtualService that routes the traffic to the helloworld Kubernetes Service:

apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
name: helloworld
spec:
hosts:
- '*'
gateways:
- public-gateway
http:
- route:
- destination:
host: helloworld.default.svc.cluster.local
port:
number: 80

Save the above YAML to helloworld-vs.yaml and deploy it using kubectl apply -f helloworld-vs.yaml.

With all these resources deployed, you can now get the external IP of the Istio's ingress gateway:

kubectl get svc -l istio=ingressgateway -n istio-system

If you open the IP that shows up in the EXTERNAL-IP column, you will see something similar to the figure below.

Connection is not secure

We got a response back from the application, but we also got the Not Secure message from the browser, which tells the user that the connection is not secure and doesn't instill a lot of confidence.

Self-signed certs and manual setup

Let's start with the simplest scenario where we manually obtain the certificate. First thing - pick a domain you want to use - note that to test this, you don't have to own an actual domain name because we will use a self-signed certificate.

A self-signed certificate is not signed by a certificate authority (CA). You'd use these certificates for development and testing. However, they don't provide all of the security features that certificates signed by a CA provide.

I will use mysuperdomain.com for my domain name.

export DOMAIN_NAME=mysuperdomain.com

As a first step, we are going to create the root certificate ($DOMAIN_NAME.crt) and the private key used for signing the certificate ($DOMAIN_NAME.key):

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=$DOMAIN_NAME Inc./CN=$DOMAIN_NAME' -keyout $DOMAIN_NAME.key -out $DOMAIN_NAME.crt

The above command creates a .crt and a .key file.

Next, we need to create the private key and a signing request:

openssl req -out helloworld.$DOMAIN_NAME.csr -newkey rsa:2048 -nodes -keyout helloworld.$DOMAIN_NAME.key -subj "/CN=helloworld.$DOMAIN_NAME/O=hello world from $DOMAIN_NAME"

Finally, we can create the certificate:

openssl x509 -req -days 365 -CA $DOMAIN_NAME.crt -CAkey $DOMAIN_NAME.key -set_serial 0 -in helloworld.$DOMAIN_NAME.csr -out helloworld.$DOMAIN_NAME.crt

Now that you have the certificate and the key, you can create the Kubernetes Secret to store the certificate and the key.

The secret with certificates must be called istio-ingressgateway-certs, and we have to deploy it to the istio-system namespace. That way, the Istio ingress gateway will load the secret automatically.

kubectl create secret tls istio-ingressgateway-certs -n istio-system --key helloworld.$DOMAIN_NAME.key --cert helloworld.$DOMAIN_NAME.crt

With the secret in place, let's update the Gateway resource and tell it to use this certificate and private key:

cat <<EOF | kubectl apply -f -
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
name: public-gateway
spec:
selector:
istio: ingressgateway
servers:
- port:
number: 443
name: https
protocol: HTTPS
tls:
mode: SIMPLE
# These are coming from the istio-ingressgateway-certs secret
serverCertificate: /etc/istio/ingressgateway-certs/tls.crt
privateKey: /etc/istio/ingressgateway-certs/tls.key
hosts:
- helloworld.$DOMAIN_NAME
EOF

Similarly, we need to update the hosts field in the VirtualService with the domain name we set to the $DOMAIN_NAME environment variable:

cat <<EOF | kubectl apply -f -
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
name: helloworld
spec:
hosts:
- helloworld.$DOMAIN_NAME
gateways:
- public-gateway
http:
- route:
- destination:
host: helloworld.default.svc.cluster.local
port:
number: 80
EOF

The simplest way to test that this works is to use cURL and the --resolve flag.

The resolve flag has a format of [DOMAIN]:[PORT]:[IP] and it routes all requests that match the [DOMAIN]:[PORT] portion to the specified IP address. This way, we don't need to go to DNS/domain registrars' website and make changes to test this, and we can use a domain that might not even exist.

The IP address in our case is the external IP address of the ingress gateway. Let's save the gateways' IP address to EXTERNAL_IP environment variable:

export EXTERNAL_IP=$(kubectl get svc istio-ingressgateway -n istio-system -o jsonpath='{.status.loadBalancer.ingress[0].ip}')

Finally, let's use this cURL command to test that the SSL certs get verified and used:

curl -v --resolve helloworld.$DOMAIN_NAME:443:$EXTERNAL_IP --cacert $DOMAIN_NAME.crt https://helloworld.$DOMAIN_NAME

We are telling cURL to resolve any requests to helloworld.mysuperdomain.com:443 to the external IP address of the ingress gateway with the above command. Additionally, we are providing the name of the CA certificate we created earlier.

From the output, you will be able to see the details of the server certificate and a line that says the certificate was verified as well as the actual response from the helloworld Pod:

...
* Server certificate:
* subject: CN=helloworld.mysuperdomain.com; O=hello world from mysuperdomain.com
* start date: Feb 2 23:32:11 2021 GMT
* expire date: Feb 2 23:32:11 2022 GMT
* common name: helloworld.mysuperdomain.com (matched)
* issuer: O=mysuperdomain.com Inc.; CN=mysuperdomain.com
* SSL certificate verify ok.
...
Hello World

Real-signed certs and manual setup

The self-signed cert route from the previous section is useful to kick the tires and test things out. We will need certificates signed by an actual certificate authority (CA) that your clients can trust.

There are a couple of ways you can get SSL certificates. The most popular one is Let's Encrypt. We will be using SSL For Free, which uses Let's Encrypt to issue the certificates. If you want to spend money, you can also purchase SSL certificates from your domain registrar or at DigiCert.

In this section, we will use a real domain name and actual SSL certificates - this means that if you want to follow along, make sure you have your domain ready to go.

Once you registered a domain, open SSL for Free to get the SSL certificates. Note that you will have to register for a free account to create the SSL certificate.

  1. Enter your domain name, e.g. mydomain.com in the text field.
  2. Click the Create Free SSL Certificate button.
  3. From the dashboard, click the New Certificate button.

New Certificate

  1. Enter the domain name and click the Next Step button.
  2. Select the 90-Day certificate option and click Next Step.
  3. Confirm the auto-generate CSR option and click Next Step.
  4. On the last page, select the Free option and click Next Step.

Once the certificate is created, we will need to verify the domain name and prove we own the domain name we created the SSL certificate for.

There are three options to verify the domain: email verification (ensure you have emails set up on the domain), DNS (CNAME) verification, and HTTP file upload.

Install Certificate

You can use any one of these options. I'll be using the CNAME verification. CNAME verification involves logging in to your domain registrars and setting a CNAME record with a specific value.

Set the A name record

While we are logged in to the domain registrar's website, let's also create an A record for the domain that will point to your cluster's external IP address.

Since we requested a certificate for mydomain.com and www.mydomain.com, the A record should point from mydomain.com to the IP address.

Verifying the domain

After we've set the A record and CNAME, we can click the Verify Domain button. Note that it might take a while for the values to propagate and verify the domain.

Once the domain is verified, the certificate will be issued, and you'll be able to download a ZIP package with generated files.

The package will contain the following files:

  • ca_bundle.crt
  • certificate.crt
  • private.key

Re-create the secret

Let's delete the existing ingressgateway-certs secret, and create a new one with real certificates:

kubectl delete secret istio-ingressgateway-certs -n istio-system

We can re-create the Secret with the real SSL certificate and key we got from the downloaded package:

kubectl create secret tls istio-ingressgateway-certs -n istio-system --key private.key --cert certificate.crt

We also need to update the Gateway and the VirtualService to modify the hostnames.

Let's update the Gateway first (make sure you update the mysuperdomain.com to your actual domain name):

cat <<EOF | kubectl apply -f -
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
name: public-gateway
spec:
selector:
istio: ingressgateway
servers:
- port:
number: 443
name: https
protocol: HTTPS
tls:
mode: SIMPLE
# These are coming from the istio-ingressgateway-certs secret
serverCertificate: /etc/istio/ingressgateway-certs/tls.crt
privateKey: /etc/istio/ingressgateway-certs/tls.key
hosts:
- mysuperdomain.com
EOF

Similarly, make a change to the VirtualService:

cat <<EOF | kubectl apply -f -
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
name: helloworld
spec:
hosts:
- mysuperdomain.com
gateways:
- public-gateway
http:
- route:
- destination:
host: helloworld.default.svc.cluster.local
port:
number: 80
EOF

With both of these resources updated, you can open your browser of choice and navigate to the domain. You should see Hello World! response and the padlock before the domain name shows that the website is secure. If you click on the padlock and check the certificate, you will see your domain name in the certificate, as well as the root authority (Let's Encrypt) and the expiration date.