Skip to main content
logoTetrate Service BridgeVersion: 1.10.x

Configure and route HTTP, non-HTTP (multi-protocol) and multi-port service traffic in TSB

This how-to document will show you how to configure non-HTTP servers with TSB. After reading this document you should be familiar with the usage of the TCP section in IngressGateway and Tier1Gateway API.

Summary​

Workflow is exactly the same as configuring HTTP servers in IngressGateway and Tier1Gateway. However, multi-port services are supported for non-HTTP.

Before you get started, make sure you:
✓ Familiarize yourself with TSB concepts
✓ Familiarize yourself with onboarding clusters
✓ Create a Tenant

Setup​

  • Four clusters with TSB installed - Management plane, Tier-1 and Tier-2 edge clusters.
  • In Tier-2 clusters, deploy Tier-2 gateways in echo namespace
  • In Tier-1 cluster, deploy Tier-1 gateway in tier1 namespace
  • In both the gateways, the ports 8080 and 9999 should be available (for simplicity, we consider the service and the target ports to be the same). For installing gateways, see here
  • Deploy apps in Tier-2 cluster which work with HTTP and non-HTTP traffic. In this demo, you will deploy applications from the Istio's samples directory into the echo namespace.
  • Make sure you have the required privileges to deploy the gateway configurations.

TSB configuration​

Configuring workspace and groups​

First create the workspace. Here, we assume that the clusters were onboarded as cluster-0, cluster-1, cluster-2 and cluster-3. It is also assumed that cluster-3 is Tier-1, cluster-0 has TSB management plane installed.

apiVersion: api.tsb.tetrate.io/v2
kind: Workspace
metadata:
 name: tcp-http-demo
 organization: tetrateio
 tenant: tetrate
spec:
 namespaceSelector:
   names:
     - "cluster-1/echo"
     - "cluster-2/echo"
     - "cluster-3/tier1"

Separate groups are configured for Tier-1 and Tier-2 gateways

apiVersion: gateway.tsb.tetrate.io/v2
kind: Group
metadata:
 name: tcp-http-test-t2-group
 organization: tetrateio
 tenant: tetrate
 workspace: tcp-http-demo
spec:
 namespaceSelector:
   names:
   - "cluster-1/echo"
   - "cluster-2/echo"
---
apiVersion: gateway.tsb.tetrate.io/v2
kind: Group
metadata:
 name: tcp-http-test-t1-group
 organization: tetrateio
 tenant: tetrate
 workspace: tcp-http-demo
spec:
 configMode: BRIDGED
 namespaceSelector:
   names:
   - "cluster-3/tier1"

Provisioning certificates and keys for the gateways​

You have to create two secrets in the namespaces where gateway workloads are deployed

  • hello-tlscred for the Helloworld application
  • echo-tlscred for the TCP-echo application

You can provision certificates with tools like openssl and create secrets as follows.

# Create secrets for the helloworld application. Here the certificate and
# the keys are provisioned in helloworld.crt and helloworld.key
kubectl --context=<kube-cluster-context> -n <gateway-ns> create secret tls hello-tlscred \
          --cert=helloworld.crt --key=helloworld.key

# Create secrets for the tcp-echo application
kubectl --context=<kube-cluster-context> -n <gateway-ns> create secret tls echo-tlscred \
          --cert=echo.crt --key=echo.key

Configuring Ingress Gateway at Tier-2 clusters​

A few notes

  • For the configuration of port 8080, TLS is required and the hostnames must be different. Otherwise, it is an error.
  • The credentials are stored as secret in the namespace where gateway workloads are running. In Tier-2, it is the echo namespace and in Tier-1 it is the tier1 namespace.
apiVersion: gateway.tsb.tetrate.io/v2
kind: Gateway
metadata:
name: tcp-http-t2-gateway
organization: tetrateio
tenant: tetrate
workspace: tcp-http-demo
group: tcp-http-test-t2-group
spec:
workloadSelector:
  namespace: echo
  labels:
    app: tsb-gateway-echo
http:
- name: http-hello
  port: 8080
  hostname: hello.tetrate.io
  tls:
    mode: SIMPLE
    secretName: hello-tlscred
  routing:
    rules:
    - route:
        serviceDestination:
          host: echo/helloworld.echo.svc.cluster.local
          port: 5000
tcp:
# echo.tetrate.io:8080 receives non-HTTP traffic. There
# is also hello.tetrate.io:8080 receiving HTTP traffic on
# this port. To distinguish between the two services, you
# need to have different hostnames with TLS so that the
# clients can use different SNI to distinguish between them.
# This is the "multi-protocol"/"multiple traffic type" part.
- name: tcp-echo
  port: 8080  # Same port as the previous HTTP server,
              # but different hostname.
  hostname: echo.tetrate.io
  tls:
    mode: SIMPLE
    secretName: echo-tlscred
  route:
    serviceDestination:
      host: echo/tcp-echo.echo.svc.cluster.local
      port: 9000
# There is already a service called echo.tetrate.io defined
# port 8080. There can be another TCP service with the same
# hostname on a different port. This is the "multi-port" part.
- name: tcp-echo-2
  port: 9999
  hostname: echo.tetrate.io
  route:
    serviceDestination:
      host: echo/tcp-echo.echo.svc.cluster.local
      port: 9001

Configuring Edge gateway​

The host:port defined here should match exactly with the host:port and the traffic type should match exactly with the ones defined in IngressGateway before

apiVersion: gateway.tsb.tetrate.io/v2
kind: Gateway
metadata:
name: tcp-http-t1-gateway
organization: tetrateio
tenant: tetrate
workspace: tcp-http-demo
group: tcp-http-test-t1-group
spec:
workloadSelector:
  namespace: tier1
  labels:
    app: tsb-gateway-tier1
http:
# This matches with the HTTP server hello.tetrate.io:8080
# defined in the Tier-2 gateway configuration 
- name: http-hello
  hostname: hello.tetrate.io
  port: 8080
  tls:
    mode: SIMPLE
    secretName: hello-tlscred
  routing:
    rules:
      - route:
          clusterDestination: {}
tcp:
# This matches with echo.tetrate.io:8080. The names need not
# be the same between the configs, but hostname must match.
- name: tcp-echo
  hostname: echo.tetrate.io
  port: 8080
  tls:
    mode: SIMPLE
    secretName: echo-tlscred
  route:
    clusterDestination: {}
# This matches with echo.tetrate.io:9999 in Tier-2 configs.
- name: tcp-echo-2
  hostname: echo.tetrate.io
  port: 9999
  route:
    clusterDestination: {}

Routing traffic between clusters​

North-south (From Tier-1 to Tier-2 clusters)​

First, find out the external IP address of the Tier-1 gateway and save it in TIER1_IP variable

export TIER1_IP=<tier1-gateway-ip>

Routing HTTPS traffic​

curl -svk --resolve hello.tetrate.io:8080:$TIER1_IP -H "X-B3-Sampled: 1" https://hello.tetrate.io:8080/hello

NOTE: Don't use -k flag unless it is for testing purposes. It skips server certificate verification and is insecure

Routing non-HTTP traffic​

  1. TLS traffic - There could be some warnings related to the server certificates. As this is a demo, they can be ignored.
openssl s_client -connect $TIER1_IP:8080 -servername echo.tetrate.io
  1. Plain TCP traffic
echo hello | nc -v $TIER1_IP 9999

East-west (Between Tier-2 clusters)​

DNS names defined in the hostname field is used for routing east-west traffic. Exec into an Istio sidecar-injected pod from where you would like to send the traffic and run nc for non-HTTP (but TCP) traffic. No need to initiate TLS here as TLS origination is done by the sidecar.

kubectl -n echo exec -it <pod-name> -c app -- sh -c "echo hello | nc -v echo.tetrate.io 8080"
kubectl -n echo exec -it <pod-name> -c app -- sh -c "echo hello | nc -v echo.tetrate.io 9999"
kubectl -n echo exec -it <pod-name> -c app -- curl -sv -H "X-B3-Sampled: 1" hello.tetrate.io:8080