UI Metrics Troubleshooting

TSB's UI displays metrics and health of your services. However, if there are no metrics or traces displayed, then you may be facing an issue with either your services, or with TSB.

This guide will walk you through how to determine whether the issue is with a service, or with one of the metrics components within TSB.

Metrics

If you don't see the metrics, use this section of the guide to troubleshoot.

First, make sure that you have traffic flowing in your application. You need traffic to generate metrics.

Check that the time range window you've set in TSB is correct, and there was traffic during that period.

Check if running a UI query in your browser returns a status. Use your browser inspect command and check the request/response details.

From the inspector, select the Network tab and open your application from the TSB UI. You should see a list of all the requests between your browser and the TSB backend.

Search for the last graphql request.

If you don't see the query, it may indicate that your application is not handling any traffic, or you're having a problem with the OAP deployment.

To inspect OAP, use the following steps:

Check if the OAP Pod in the tsb Namespace is up and running by confirming whether there are any errors in the pod's log:

kubectl -n tsb logs -l app=oap

The errors from the logs will help you triage the problem.

If the issue is related to Elasticsearch, check if OAP in the control plane namespace (istio-system) is receiving Access Log Service (ALS) data from various Envoys by forwarding the monitoring port of the OAP pods to your local computer, and querying some metrics using the following steps:

Start a port-forward to OAP in a shell:

kubectl -n istio-system port-forward deployment/oap-deployment 1234

If there is no issue, you should see:

Forwarding from 127.0.0.1:1234 -> 1234
Forwarding from [::1]:1234 -> 1234

In a different shell, curl the metrics with the command below:

curl -s http://localhost:1234/ | grep "envoy_als_in_count"

You should see something similar to this example output:

envoy_als_in_count{id="router~10.28.0.25~tsb-gateway-7b7fbcdfb7-726bf.bookinfo~bookinfo.svc.cluster.local",cluster="tsb-gateway",} 67492.0
envoy_als_in_count{id="sidecar~10.28.0.19~details-v1-94d5d794-kt76x.bookinfo~bookinfo.svc.cluster.local",cluster="details.bookinfo",} 33747.0
envoy_als_in_count{id="sidecar~10.28.0.23~reviews-v3-5556b6949-pvqfn.bookinfo~bookinfo.svc.cluster.local",cluster="reviews.bookinfo",} 22500.0
envoy_als_in_count{id="sidecar~10.28.0.24~productpage-v1-665ddb5664-ts6pz.bookinfo~bookinfo.svc.cluster.local",cluster="productpage.bookinfo",} 101240.0
envoy_als_in_count{id="sidecar~10.28.0.22~reviews-v2-6cb744f8ff-mf8s6.bookinfo~bookinfo.svc.cluster.local",cluster="reviews.bookinfo",} 22498.0
envoy_als_in_count{id="sidecar~10.28.0.20~ratings-v1-744894fbdb-ctvpd.bookinfo~bookinfo.svc.cluster.local",cluster="ratings.bookinfo",} 22499.0
envoy_als_in_count{id="sidecar~10.28.0.21~reviews-v1-f7c7c7b45-8v2sf.bookinfo~bookinfo.svc.cluster.local",cluster="reviews.bookinfo",} 11249.0

You should see the numbers on the right-hand side increase if your application is in use.

If you don't see any metrics, or the metrics do not change over time, check if your application sidecars (Envoy) are sending ALS metrics to the control plane OAP by performing aport-forward of the Istio Sidecar on port 15000 and query the envoy_accesslog_service metric. The standard number of cx_active metrics (i.e. the number of current connections) is two.

The below example uses the productpage service of the bookinfo application:

# start the port-forward in a shell
kubectl -n bookinfo port-forward deployment/productpage-v1 15000
Forwarding from 127.0.0.1:15000 -> 15000
Forwarding from [::1]:15000 -> 15000

# curl the config in another shell
curl -s http://localhost:15000/clusters | grep "envoy_accesslog_service" | grep cx_active
envoy_accesslog_service::10.31.243.206:11800::cx_active::2

If the counters aren't what you expect, add debug logging level to OAP by editing the OAP's config.yml with the following command:

kubectl -n istio-system edit cm oap-config

Search for the following lines and remove the comments around it:

<!-- uncomment following line when need to debug ALS raw data
   <logger name="io.tetrate.spm.user.receiver.envoy" level="DEBUG"/>
-->

So that it becomes:

<logger name="io.tetrate.spm.user.receiver.envoy" level="DEBUG"/>

Then, restart OAP for the configuration change to take effect:

kubectl -n istio-system delete pod -l app=oap

Now you can search the logs for downstream_remote_address. If you have searchable logs, it means that the metrics are reaching the OAP service.

• search in the Elasticsearch back-end
  Metrics are kept in Elasticsearch (ES) indices. You can check the status and health of the ES by sending some queries.
  

As the ES server is not managed by TSB, please refer to your documentation for the correct connection string.

In the example, we set a port-forward to the ES pod inside the tsb namespace.

# port forward to ES server
kubectl -n tsb port-forward statefulset/elasticsearch 9200

# check cluster health
curl -s  'http://localhost:9200/_cluster/health?pretty=true'

Output

{
    "cluster_name" : "elasticsearch",
    "status" : "yellow",
    "timed_out" : false,
    "number_of_nodes" : 1,
    "number_of_data_nodes" : 1,
    "active_primary_shards" : 64,
    "active_shards" : 64,
    "relocating_shards" : 0,
    "initializing_shards" : 0,
    "unassigned_shards" : 5,
    "delayed_unassigned_shards" : 0,
    "number_of_pending_tasks" : 0,
    "number_of_in_flight_fetch" : 0,
    "task_max_waiting_in_queue_millis" : 0,
    "active_shards_percent_as_number" : 92.7536231884058
}

The status line should be green or yellow. If it's red, then the issue is with the ES cluster. You should check the indices' status using the command:

# Indices status for the 26 March 2020
curl -H'Content-Type: application/json' -s -XGET 'http://localhost:9200/_cat/shards/*20200326

You should see a list of all the indices. They should all be in the STARTED state. Next columns hold the number of documents and the size of the index. By running the command at different times, you should see these numbers increasing.

service_5xx-20200326                                 0 p STARTED  31236   1.4mb 10.28.1.12 elasticsearch-0
service_instance_relation_client_call_sla-20200326   0 p STARTED  53791   5.1mb 10.28.1.12 elasticsearch-0
endpoint_percentile-20200326                         0 p STARTED 128707  12.7mb 10.28.1.12 elasticsearch-0
endpoint_2xx-20200326                                0 p STARTED 123131   7.4mb 10.28.1.12 elasticsearch-0
...