Service Route

Service Routes can be used by service owners to configure traffic shifting across different versions of a service in a Traffic Group. The traffic to this service can originate from sidecars in the same or different traffic groups, as well as gateways.

The following example yaml defines a Traffic Group g1 in the namespaces ns1, ns2 and ns3, owned by its parent Workspace w1. Then it defines a Service Route for the reviews service in the ns1 namespace with two subsets: v1 and v2, where 80% of the traffic to the reviews service is sent to v1 while the remaining 20% is sent to v2.

apiVersion: traffic.tsb.tetrate.io/v2
kind: Group
metadata:
  name: t1
  workspace: w1
  tenant: mycompany
  organization: myorg
spec:
  namespaceSelectors:
  - name: "*/ns1"
  - name: "*/ns2"
  - name: "*/ns3"
  configMode: BRIDGED
---
apiVersion: traffic.tsb.tetrate.io/v2
kind: ServiceRoute
metadata:
  name: reviews
  group: g1
  workspace: w1
  tenant: mycompany
  organization: myorg
spec:
  service: ns1/reviews.svc.cluster.local
  subsets:
  - name: v1
    labels:
      version: v1
    weight: 80
  - name: v2
    labels:
      version: v2
    weight: 20

Server side load balancing can be set through the combination of portLevelSettings and stickySession. The following ServiceRoute will generate two routes:

1. An HTTP route matching traffic on port 8080 and routing it 80:20 between v1:v2, targeting port 8080. The server side load balancing will be based on header.
2. A TCP route matching traffic on port 443, and routing it 80:20 between v1:v2, targeting port 443. The server side load balancing will be based on source IP.

apiVersion: traffic.tsb.tetrate.io/v2
kind: ServiceRoute
metadata:
  name: reviews
  group: g1
  workspace: w1
  tenant: mycompany
  organization: myorg
spec:
  service: ns1/reviews.svc.cluster.local
  portLevelSettings:
  - port: 8080
    trafficType: HTTP
    stickySession:
      header: x-session-hash
  - port: 443
    trafficType: TCP
    stickySession:
      useSourceIp: true
  subsets:
  - name: v1
    labels:
      version: v1
    weight: 80
  - name: v2
    labels:
      version: v2
    weight: 20

Note: For TCP routes, only source IP (useSourceIp: true) is a valid load balancing hash key. Any other hash keys will be invalid.

You can also apply port settings just to a subset, such as in the following example where for subset v2 the source IP is used for sticky sessions.

apiVersion: traffic.tsb.tetrate.io/v2
kind: ServiceRoute
metadata:
  name: reviews
  group: t1
  workspace: w1
  tenant: mycompany
  organization: myorg
spec:
  service: ns1/reviews.svc.cluster.local
  portLevelSettings:
   - port: 8000
     trafficType: TCP
   - port: 443
     trafficType: HTTP
     stickySession:
       header: x-sticky-hash
 subsets:
   - name: v1
     labels:
       version: v1
     weight: 80
   - name: v2
     labels:
       version: v2
     weight: 20
     portLevelSettings:
       - port: 8000
         trafficType: TCP
         stickySession:
           useSourceIp: true

If the service exposes more than one port, then all such ports with protocols need to be specified in top level portLevelSettings. Explicit routes can be specified within httpRoutes or tcpRoutes sections. You can also specify match conditions within each httpRoute to match the incoming traffic and route the traffic accordingly.

The ServiceRoute below has two HTTP routes:

1. The first route matches traffic on reviews.svc.cluster.local:8080/productpage endpoint and end-user: jason header and routes 80% of traffic to subset "v1" and 20% to subset "v2".
2. The second route is the default HTTP route, which matches traffic on reviews.ns1.svc.cluster.local:8080/productpage endpoint, and routes 50% of traffic to subset "v1" and remaining 50% to subset "v2".

apiVersion: traffic.xcp.tetrate.io/v2
kind: ServiceRoute
metadata:
  name: reviews
  group: t1
  workspace: w1
  tenant: mycompany
  organization: myorg
spec:
  service: ns1/reviews.svc.cluster.local
  portLevelSettings:
    - port: 8080
      trafficType: HTTP
  subsets:
    - name: v1
      labels:
        version: v1
      weight: 80
    - name: v2
      labels:
        version: v2
      weight: 20
  httpRoutes:
    - name: http-route-match-productpage-endpoint
      match:
        - name: match-productpage-endpoint
          uri:
            prefix: /productpage
          headers:
            end-user:
              exact: jason
          port: 8080
      destination:
        - subset: v1
          weight: 80
          port: 8080
        - subset: v2
          weight: 20
          port: 8080
    - name: http-route-default
      match:
        - name: match-default
          uri:
            prefix: /productpage
          port: 8080
      destination:
        - subset: v1
          weight: 50
          port: 8080
        - subset: v2
          weight: 50
          port: 8080

Note: Default routes will be generated automatically only if a port is specified in top level portLevelSettings but not used in any match conditions of httpRoutes, tcpRoutes or tlsRoutes (or if no routes are specified). In all other conditions, all routes have to defined explicitly.

For example, the ServiceRoute below will generate a default-http-route matching on port 8080 and will route traffic in the ratio 80:20 between v1:v2.

 apiVersion: traffic.xcp.tetrate.io/v2
 kind: ServiceRoute
metadata:
  name: reviews
  group: t1
  workspace: w1
  tenant: mycompany
  organization: myorg
 spec:
   service: ns1/reviews.ns1.svc.cluster.local
   portLevelSettings:
     - port: 8080
       trafficType: HTTP
   subsets:
     - name: v1
       labels:
         version: v1
       weight: 80
     - name: v2
       labels:
         version: v2
       weight: 20

Finally, a similar example but for TCP traffic where all the traffic for port 666 will be sent to v1 subset.

 apiVersion: traffic.tsb.tetrate.io/v2
 kind: ServiceRoute
 metadata:
   name: reviews
   group: t1
   workspace: w1
   tenant: mycompany
   organization: myorg
 spec:
   service: ns1/reviews.ns1.svc.cluster.local
   portLevelSettings:
     - port: 6666
       trafficType: TCP
   subsets:
     - name: v1
       labels:
         version: v1
       weight: 50
     - name: v2
       labels:
         version: v2
       weight: 50
   tcpRoutes:
     - name: tcp-route-match-port-6666-v1-100
       match:
         - name: match-condition-port-6666-v1-100
           port: 6666
       destination:
         - subset: v1
           weight: 100
           port: 6666

HTTPMatchCondition

HTTPMatchCondition is the set of conditions to match incoming HTTP traffic and route accordingly. We could have used HttpMatchCondition from ingress_gateway.proto but it doesn't have a port field, so it's better to create one natively.

Field	Description	Validation Rule
name	string REQUIRED Name of the match condition	string = {   min_len: 1 }
uri	tetrateio.api.tsb.gateway.v2.StringMatch Incoming URI to match in incoming traffic for routing forward	–
headers	map<string, tetrateio.api.tsb.gateway.v2.StringMatch> Headers to match in incoming traffic for routing forward	–
port	uint32 REQUIRED Port to match in incoming traffic	uint32 = {   lte: 65535   gte: 1 }

HTTPRoute

HTTPRoute is used to set HTTP routes to service destinations on the basis of match conditions.

Field	Description	Validation Rule
name	string REQUIRED Name of HTTPRoute	string = {   min_len: 1 }
match	List of tetrateio.api.tsb.traffic.v2.HTTPMatchCondition Match conditions for incoming HTTP traffic	–
destination	List of tetrateio.api.tsb.traffic.v2.ServiceDestination Destination host:port and subset where HTTP traffic should be directed	–

ServiceDestination

ServiceDestination is the destination service, port and subset where traffic should be routed

Field	Description	Validation Rule
subset	string Subset is the version of the service where traffic should be routed to	–
weight	uint32 Weight defines the amount of traffic that needs to be routed to this specific version	–
port	uint32 REQUIRED The port corresponding to the service host where traffic should be routed	uint32 = {   lte: 65535   gte: 1 }
destinationHost	string Service host where traffic should be routed to. This should either be a FQDN or a short name for the k8s service. For example, "reviews" as destination_host will be interpreted as "reviews.ns1.cluster.local"	–

ServiceRoute

A service route controls routing configurations for traffic to a service in a traffic group.

Field	Description	Validation Rule
service	string REQUIRED The service on which the configuration is being applied. Must be in namespace/FQDN format.	string = {   pattern: ^[^/]+/[^/]+$ }
subsets	List of tetrateio.api.tsb.traffic.v2.ServiceRoute.Subset REQUIRED The set of versions of a service and the percentage of traffic to send to each version.	repeated = {   min_items: 1 }
stickySession	tetrateio.api.tsb.traffic.v2.ServiceRoute.StickySession StickySession specifies how to forward traffic from a client to the same backend	–
portLevelSettings	List of tetrateio.api.tsb.traffic.v2.ServiceRoute.PortLevelTrafficSettings In order to support multi-protocol routing, a list of all port/protocol combinations is needed. These port settings are applied to all the subsets	–
httpRoutes	List of tetrateio.api.tsb.traffic.v2.HTTPRoute HTTPRoutes are used when HTTP traffic needs to be matched on uri, headers and port and destination routes need to be set using subset-weight combinations specified within the route. Note: If a route is specified, then the global subset-weight combinations (specified under subsets) will be ignored for the matched port, as subsets within route will take effect.	–
tcpRoutes	List of tetrateio.api.tsb.traffic.v2.TCPRoute TCPRoutes match TCP traffic based on port number. The subset-weight configuration and priority have the same behaviour as HTTPRoutes.	–
configGenerationMetadata	tetrateio.api.tsb.types.v2.ConfigGenerationMetadata Metadata values that will be add into the Istio generated configurations. When using YAML APIs liketctl or gitops, put them into the metadata.labels or metadata.annotations instead. This field is only necessary when using gRPC APIs directly.	–

PortLevelTrafficSettings

PortLevelTrafficSettings explicitly defines the type of traffic for all of the ports exposed by a service for which routing rules need to be set. Depending on whether HTTPRoutes or TCTRoutes are specified or not, the main subset weights are applied or not based on the following scenarios:

1. If HTTPRoutes or TCPRoutes are specified: a. Since Port is mandatory in MatchConditions, whenever a port is used in (HTTP/TCP) MatchCondition, it needs to be present in the global PortLevelTrafficSettings. b. When MatchConditions are present in the routes, then subset-weight combinations within routes will take effect instead of the global ones.

2. If the routes are not specified, then the traffic will be matched on ports specified in PortLevelTrafficSettings, and the routes will be set according to global subset-weight combinations.

Field	Description	Validation Rule
port	uint32 REQUIRED Port number to which traffic must be routed	uint32 = {   lte: 65535   gte: 1 }
trafficType	tetrateio.api.tsb.traffic.v2.ServiceRoute.TrafficType REQUIRED Type of traffic for which a route has to be generated	enum = {   defined_only: true }
stickySession	tetrateio.api.tsb.traffic.v2.ServiceRoute.StickySession Since we are supporting multiple types of protocols, so we expect to have separate sticky sessions for each route (i.e. for a specific port/protocol combination)	–

StickySession

If set, all requests from a client will be forward to the same backend.

Field	Description	Validation Rule
header	string oneof _hash_key Hash based on a specific HTTP header.	string = {   min_len: 1 }
cookie	tetrateio.api.tsb.traffic.v2.ServiceRoute.StickySession.HTTPCookie oneof _hash_key Hash based on HTTP cookie.	–
useSourceIp	bool oneof _hash_key Hash based on the source IP address.	–

HTTPCookie

Describes a HTTP cookie that will be used for sticky sessions. If the cookie is not present, it will be generated.

Field	Description	Validation Rule
name	string REQUIRED Name of the cookie.	string = {   min_len: 1 }
path	string REQUIRED Path to set for the cookie.	string = {   min_len: 1 }
ttl	google.protobuf.Duration REQUIRED Lifetime of the cookie.	timestamp = {   required: true }

Subset

Subset denotes a specific version of a service. The pods/VMs of a subset should be uniquely identifiable using their labels.

Field	Description	Validation Rule
name	string REQUIRED Name used to refer to the subset.	string = {   min_len: 1 }
labels	map<string, string> Labels apply a filter over the endpoints of a service in the service registry.	–
weight	uint32 Percentage of traffic to be sent to this subset. Weight if not specified will be assumed to be 0 if there are multiple subsets. If there is only one subset, the weight will be assumed to be 1.	–
portLevelSettings	List of tetrateio.api.tsb.traffic.v2.ServiceRoute.PortLevelTrafficSettings Port/Protocol/StickySession combination for which routes need to be generated specifically for a subset. These settings are meant to override the global PortLevelTrafficSettings, i.e. first, global PortLevelTrafficSettings are used to generate routes and then we use non-conflicting subset level PortLevelTrafficSettings to modify existing routes. If provided, PortLevelTrafficSettings should be provided for all subsets for proper load balancing.	–

TCPMatchCondition

TCPMatchCondition is the set of conditions to match incoming TCP traffic and route accordingly

Field	Description	Validation Rule
name	string REQUIRED Name of the match condition	string = {   min_len: 1 }
port	uint32 REQUIRED TCP match conditions only have port in match conditions	uint32 = {   lte: 65535   gte: 1 }

TCPRoute

TCPRoute is used to set TCP routes to service destinations on the basis of match conditions.

Field	Description	Validation Rule
name	string REQUIRED Name of TCPRoute	string = {   min_len: 1 }
match	List of tetrateio.api.tsb.traffic.v2.TCPMatchCondition Match conditions for incoming TCP traffic	–
destination	List of tetrateio.api.tsb.traffic.v2.ServiceDestination Destination host:port and subset where TCP traffic should be directed	–

TrafficType

TrafficType is the list of allowed traffic types for generating routes

Field	Number	Description
HTTP	0	If trafficType is HTTP, then a HTTP route is generated for that port
TCP	1	If trafficType is TCP, then a TCP route is generated for that port
TLS_PASSTHROUGH	2	This mode generates TLS routes for HTTPS traffic. TLS is not terminated at the gateway and is passed through to the server