Management Plane Installation

This chart installs the TSB management plane operator, which also allows you to install TSB management plane components using the TSB ManagementPlane CR and all the required secrets to make it fully run.

Before you start, make sure that you have checked the Helm installation process.

Installation overview

1. Create a values.yaml file and edit it with your desired configuration. You can find more details on the available Helm configuration in the configuration section below. For a full reference of the spec section, see the TSB ManagementPlane CR.

2. Use the helm install command to install TSB management plane. Make sure to set the image.registry and version to the correct registry location and TSB version.

3. Wait until all TSB management plane components have been deployed successfully. You can verify your installation by trying to log in to TSB UI or connect to TSB using tctl.

Installation

To install TSB management plane, create a values.yaml file with the following content and edit it according to your needs.

spec:
  # Set the organization name. Organization name has to be lowercase to comply with RFC standards.
  organization: <organization-name>

  dataStore:
    postgres:
      host: <postgres-hostname-or-ip>
      port: <postgres-port>
      name: <database-name>
  telemetryStore:
    elastic:
      host: <elastic-hostname-or-ip>
      port: <elastic-port>
      version: <elastic-version>
      selfSigned: <is-elastic-use-self-signed-certificate>

  # TSB support OIDC and LDAP as Identity Provider.
  # Set according to your environment.
  identityProvider:
    ...

  # Enable automatic certificates management.
  # You can remove this field if you want to manage certificates using other methods.
  # Note that you will need to provide certificates as secrets in that case.
  certIssuer:
    selfSigned: {}
    tsbCerts: {}
    clusterIntermediateCAs: {}

  # The default port for TSB Management Plane is 8443. You can change it here.
  components:
    frontEnvoy:
      port: 443
    # enable oap streaming log feature
    oap:
      streamingLogEnabled: true

secrets:
  tsb:
    adminPassword: <tsb-admin-password>

  postgres:
    username: <postgres-username>
    password: <postgres-password>

  # Depending on your IdP, you need to set required secrets here.
  ...

Then, use the following helm install command to install TSB management plane. This installation can take up to 10 minutes to complete. Make sure to replace <tsb-version> and <registry-location> with the correct values.

helm install mp tetrate-tsb-helm/managementplane \
  --version <tsb-version> \
  --namespace tsb  --create-namespace \
  --values values.yaml \
  --timeout 10m \
  --set image.registry=<registry-location>

Non-prod external dependencies

If you omit the dataStore, telemetryStore, and identityProvider fields in your values.yaml file, TSB will install non-prod Postgres, Elasticsearch, and LDAP. Note that you still need to set correct secrets and credentials to use the storage.

danger

DO NOT USE NON-PROD STORAGE AND IDENTITY PROVIDER IN PRODUCTION.

Here is an example of a completed values.yaml file for a demo installation:

spec:
  organization: <organization-name>

  # Enable automatic certificates management.
  certIssuer:
    selfSigned: {}
    tsbCerts: {}
    clusterIntermediateCAs: {}

secrets:
  tsb:
    adminPassword: <tsb-admin-password>

  postgres:
    username: tsb
    password: tsb-postgres-password

  ldap:
    binddn: cn=admin,dc=tetrate,dc=io
    bindpassword: admin

Accessing TSB Management Plane

After completing the installation, you can access TSB management plane by log in to TSB UI or using tctl.

Troubleshooting

If you encounter any issues during the installation process, here are a few things to check:

• Make sure that you have entered the correct values in your values.yaml file.
• Verify that you are using the correct registry location and TSB version in the helm install command.
• If you are using a custom identity provider, make sure that you have set all of the required secrets in the secrets section of the values.yaml file.
• If you are having trouble connecting to TSB, make sure that all TSB components have been deployed successfully and that there are no errors in the logs.
• If you are using a private registry to host the TSB control plane operator image, make sure that you have authenticated with the registry and that the image.registry value is correct.

Configuration

Image configuration

This is a required field. Set image.registry to the location of your private registry where you have synced the TSB images, and set image.tag to the TSB version that you want to deploy. Specifying only this field will install the TSB control plane operator without installing other TSB components.

Name	Description	Default value
image.registry	Registry used to download the operator image. Required	containers.dl.tetrate.io
image.tag	The tag of the operator image. Required	same as the Chart version

Management plane resource configuration

This is an optional field. You can set TSB ManagementPlane CR spec in Helm values file to make the TSB management plane fully run.

Name	Description	Default value
spec	Holds the spec section of the ManagementPlane CR. Optional

Secrets configuration

This is an optional field. You can apply secrets into your cluster before installing TSB management plane or you can use Helm values to specify required secrets. Note that you can use different Helm values file if you want to separate secrets from management plane spec.

warning

Keep in mind that these options just help with creating secrets, and they must respect the configuration provided in the TSB ManagementPlane CR, otherwise the installation will end up misconfigured.

Name	Description	Default value
secrets.keep	Enabling this makes the generated secrets persist in the cluster after uninstalling the chart if they are no provided in future updates. (see Helm doc)	false
secrets.tsb.adminPassword	The password that is going to be configured for the admin user.
secrets.tsb.cert	The TLS certificate exposed by the management plane (front envoy).
secrets.tsb.key	The key for TLS certificate exposed by the management plane (front envoy).
secrets.postgres.username	The username used to access the Postgres database.
secrets.postgres.password	The password used to access the Postgres database.
secrets.postgres.cacert	The CA cert to verify TLS certificates provided by the Postgres database.
secrets.postgres.clientcert	The client cert required to access the Postgres database.
secrets.postgres.clientkey	The key for the client cert required to access the Postgres database.
secrets.elasticsearch.username	The username used to access the Elasticsearch.
secrets.elasticsearch.password	The password used to access the Elasticsearch.
secrets.elasticsearch.cacert	The CA cert to verify TLS certificates provided by the Elasticsearch.
secrets.ldap.binddn	The bind DN used to read from the LDAP IDP.
secrets.ldap.bindpassword	The password for the provided bind DN used to read from the LDAP IDP.
secrets.ldap.cacert	The CA cert to verify TLS certificates provided by the LDAP IDP.
secrets.oidc.clientSecret	The client secret used to connect to the configured OIDC.
secrets.oidc.deviceClientSecret	The device client secret used to connect to the configured OIDC.
secrets.azure.clientSecret	The client secret used to connect to the Azure OIDC.

XCP secrets configuration

XCP uses TLS and JWTs to authenticate between Edges and Central.

If secrets.xcp.autoGenerateCerts is disabled, the certificate for XCP Central and the key must be provided by the user using secrets.xcp.central.cert and secrets.xcp.central.key.

Optionally, a CA can be provided with secrets.xcp.rootca to allow the MPC component to use it to verify the certs provided by XCP Central.

If secrets.xcp.autoGenerateCerts is enabled, Cert Manager is required to provide the XCP Central certificate.

Then secrets.xcp.rootca and secrets.xcp.rootcakey will be used to create the proper Issuer and generate the certificate for XCP Central and share the CA with MPC to allow it to verify the XCP Central generated cert.

The following properties are allowed to be used to configure the XCP authentication mode:

Name	Description	Default value
secrets.xcp.autoGenerateCerts	Enabling this will auto generate the XCP Central TLS certificate. Requires cert-manager	false
secrets.xcp.rootca	The XCP components CA certificate.
secrets.xcp.rootcakey	The XCP components Root CA certificate key.
secrets.xcp.central.cert	The XCP Central certificate for TLS.
secrets.xcp.central.key	The XCP Central certificate key for TLS.
secrets.xcp.central.additionalDNSNames	Additional DNS names to be added in the XCP Central certificate when secrets.xcp.autoGenerateCerts is enabled
secrets.xcp.central.additionalURIs	Additional URIs to be added in the XCP Central certificate when secrets.xcp.autoGenerateCerts is enabled
secrets.xcp.central.additionalIPAddresses	Additional IP addresses to be added in the XCP Central certificate when secrets.xcp.autoGenerateCerts is enabled
certManager.clusterResourcesNamespace	The namespace configured in the Cert Manager installation for cluster resources.	cert-manager

Operator extended configuration

This is an optional field. You can customize TSB operator related resources like the deployment, the service or the service account using the following optional properties:

Name	Description	Default value
operator.deployment.affinity	Affinity configuration for the pod
operator.deployment.annotations	Custom collection of annotations to add to the deployment
operator.deployment.env	Custom collection of environment vars to add to the container
operator.deployment.podAnnotations	Custom collection of annotations to add to the pod
operator.deployment.replicaCount	Number of replicas managed by the deployment
operator.deployment.strategy	Deployment strategy to use
operator.deployment.tolerations	Toleration collection applying to the pod scheduling
operator.deployment.podSecurityContext	SecurityContext properties to apply to the pod
operator.deployment.containerSecurityContext	SecurityContext properties to apply to the pod's containers
operator.service.annotations	Custom collection of annotations to add to the service
operator.serviceAccount.annotations	Custom collection of annotations to add to the service account
operator.serviceAccount.imagePullSecrets	Collection of secrets names required to be able to pull images from the registry
operator.pullSecret	A Docker JSON config string that will be stored as an image pull secret