Skip to main content
logoTetrate Service BridgeVersion: 1.8.x

Istio CA

Before you get started, you must have:
✓ Vault 1.3.1 or newer
✓ Vault Injector 0.3.0 or newer

Setup Vault

Install Vault (it does not need to be installed in the Kubernetes cluster, but should be reachable from inside the Kubernetes cluster). The Vault Injector (agent-injector) must be installed into the cluster and configured to inject sidecars. This is automatically done by the Helm chart v0.5.0+ which installs Vault 0.12+ and Vault-Injector 0.3.0+. The example below assumes that Vault is installed in the tsb namespace.

For more details, check the Vault documentation.

helm install --name=vault --set='server.dev.enabled=true'

Port forward the vault service to local and set environment values to authenticate to the API

kubectl port-forward svc/vault  8200:8200 & # this will run it in the background
export VAULT_ADDR='http://[::]:8200'
export VAULT_TOKEN="root"

Create a CA Certificate

note

If you already have your own CA certificate and/or an intermediate CA certificate to use with Istio, skip to Adding Intermediate CA Certificate to Vault

Vault has a PKI Secret back-end that supports creation or management of CA Certificates. It is recommended users create an Intermediate CA certificate for Istio and keep the Root CA outside of Vault. Refer to the Vault documentation for more details.

Generate a self-signed root CA certificate in Vault using the Vault PKI back-end.

# Add audit trail in Vault
vault audit enable file file_path=/vault/vault-audit.log

# Enable PKI secret back-end
vault secrets enable pki

# Update PKI lease to 1 year
vault secrets tune -max-lease-ttl=8760h pki

# Create a Self Signed CA
vault write pki/root/generate/internal common_name=tetrate.io ttl=8760h

Intermediate CA for Istio

Now that we have a CA in Vault, we use it to create an intermediate CA for Istio. We re-use the pki Secret back-end but with a new path (istioca). This time we need to get the CA Key and will call the exported endpoint instead of internal:

# Enable PKI in a new path for intermediate CA
vault secrets enable --path istioca pki

# Update lease time to 5 years
vault secrets tune -max-lease-ttl=43800h istioca

# Create Intermediate CA cert and Key
vault write istioca/intermediate/generate/exported common_name="tetrate.io Intermediate Authority" ttl=43800h
Output
Key                 Value
--- -----
csr -----BEGIN CERTIFICATE REQUEST-----
MIICcTCCAVkCAQAwLDEqMCgGA1UEAxMhdGV0cmF0ZS5pbyBJbnRlcm1lZGlhdGUg
...
...
7HJEy22yCFvVcR+Gtf++iZG+w04E2ah99xrzb+NdWDgw6asBg7oJg/bJQoA4/Wb5
OX2jl0E=
-----END CERTIFICATE REQUEST-----
private_key -----BEGIN RSA PRIVATE KEY-----
MIIEpQIBAAKCAQEA8Vmm2urwUHdAp1j3vs8aOqYGrDz3NwJbm6du+3WmgGHQ+sEC
...
...
yri2DiQWzwk3zIvzNSSbQdACPPeF90BLFW9L4xvN8D6gBxFL0wBa7GY=
-----END RSA PRIVATE KEY-----
private_key_type rsa

Copy the Certificate Signing Request (CSR) into a local file istioca.csr (including the -----BEGIN CERTIFICATE REQUEST----- and -----END CERTIFICATE REQUEST-----).

Copy the CA Key into a local file istioca.key. It is advised to keep a backup of this key in a secure place.

Now we can use the Vault CA to sign the CSR:

vault write pki/root/sign-intermediate csr=@istioca.csr format=pem_bundle ttl=43800h
Output
Key              Value
--- -----
certificate -----BEGIN CERTIFICATE-----
MIIDMDCCAhigAwIBAgIUGJgs6yFbK/eDW31RpdSiNeVQYvUwDQYJKoZIhvcNAQEL
...
...
PcPHltvhXDjckPK1jt9gpLMTaBhe9uu7Ve7b2OFv+mtAGiCEvALv+ddLa0GHrl3s
f2vq6A==
-----END CERTIFICATE-----
expiration 1618951159
issuing_ca -----BEGIN CERTIFICATE-----
MIIDLDCCAhSgAwIBAgIUFVRq5X/cAOlDKl/h34VudUdSiMwwDQYJKoZIhvcNAQEL
...
...
d4SklUyQdxnW96IdkHSPWf46jh31tDWqco6LzmrxD4OmjSeLaf0zeErU1i41xAnW
-----END CERTIFICATE-----
serial_number 18:98:2...:f5

Save the certificate to a file named istioca.crt.

Adding Intermediate CA Certificate to Vault

We now need to put the signed Intermediate CA certificate into Vault.

vault write istioca/intermediate/set-signed certificate=@istioca.crt

Istio will also generate certificates based on the intermediate CA certificate and needs both the certificate and its key. While Vault can send the certificate using its API, we have to take care of the key. To do so, we make a copy of the key inside a Vault Secret for later.

Enable the kv secrets engine if not enabled already.

vault secrets enable kv
```text title="Output"
Success! Enabled the kv secrets engine at: kv/

Now save the CA key in it.

vault kv put kv/istioca ca-key.pem=@istioca.key

Configure the Vault-Injector

Configure a Vault role that will match the Kubernetes Service Account of Istio. This role will be used by the Vault-Injector. In the following example, the role is named istiod and is bound to the istiod service account, istiod-service-account.

Enable the Kubernetes auth method:

vault auth enable kubernetes

Create the named role istiod

vault write auth/kubernetes/role/istiod \
bound_service_account_names=istiod-service-account \
bound_service_account_namespaces=istio-system \
policies=istioca \
period=600s

Enable the istiod-service-account to communicate via the vault-inject container to vault

export VAULT_SA_NAME=$(kubectl get sa -n istio-system istiod-service-account \
--output jsonpath="{.secrets[*]['name']}")
export SA_JWT_TOKEN=$(kubectl get secret -n istio-system $VAULT_SA_NAME \
--output 'go-template={{ .data.token }}' | base64 --decode)
export SA_CA_CRT=$(kubectl config view --raw --minify --flatten \
--output 'jsonpath={.clusters[].cluster.certificate-authority-data}' | base64 --decode)
export K8S_HOST=$(kubectl config view --raw --minify --flatten \
--output 'jsonpath={.clusters[].cluster.server}')

vault write auth/kubernetes/config \
token_reviewer_jwt="$SA_JWT_TOKEN" \
kubernetes_host="$K8S_HOST" \
kubernetes_ca_cert="$SA_CA_CRT"

Create the Policy that will allow the above mentioned role to access the PKI Secret back-end. This Policy enables Istio to read the key/values inside the secret secret/data/istioca, where we have stored the Key of the Intermediate CA. It also allows Istio to access the Intermediate CA and the CA chain (by using *) and finally the Root CA.

cat > policy.hcl <<EOF
path "kv/istioca" {
capabilities = ["read", "list"]
}
path "istioca/cert/*" {
capabilities = ["read", "list"]
}
path "pki/cert/ca" {
capabilities = ["read", "list"]
}
EOF
vault policy write istioca policy.hcl

Configure TSB ControlPlane CRD

Update your ControlPlane CR or Helm values and add the specific istiod component configuration to use Vault:

spec:
components:
istio:
kubeSpec:
overlays:
- apiVersion: install.istio.io/v1alpha1
kind: IstioOperator
name: tsb-istiocontrolplane
patches:
- path: spec.meshConfig.defaultConfig.holdApplicationUntilProxyStarts
value: true
- path: spec.components.pilot.k8s.env
value:
- name: ROOT_CA_DIR
value: /vault/secrets
- path: spec.components.pilot.k8s.podAnnotations
value:
vault.hashicorp.com/agent-inject: "true"
vault.hashicorp.com/agent-inject-secret-ca-cert.pem: istioca/cert/ca
vault.hashicorp.com/agent-inject-secret-ca-key.pem: kv/istioca
vault.hashicorp.com/agent-inject-secret-cert-chain.pem: istioca/cert/ca_chain
vault.hashicorp.com/agent-inject-secret-root-cert.pem: pki/cert/ca
vault.hashicorp.com/agent-inject-template-ca-cert.pem: |
{{- with secret "istioca/cert/ca" -}}
{{ .Data.certificate }}
{{- end }}
vault.hashicorp.com/agent-inject-template-ca-key.pem: |
{{- with secret "kv/istioca" -}}
{{ index .Data "ca-key.pem" }}
{{- end }}
vault.hashicorp.com/agent-inject-template-cert-chain.pem: |
{{- with secret "istioca/cert/ca_chain" -}}
{{ .Data.certificate }}
{{- end }}
vault.hashicorp.com/agent-inject-template-root-cert.pem: |
{{- with secret "pki/cert/ca" -}}
{{ "" | or ( .Data.certificate ) }}
{{- end }}
vault.hashicorp.com/role: istiod
vault.hashicorp.com/secret-volume-path: /etc/cacerts-vault

Here, we add an environment variable ROOT_CA_DIR pointing Istio to the directory where we create the new CA files from Vault. Then we add the Vault-Injector annotations to create the certificates.

Annotations are composed of a secret from Vault and a template defining how to create the file on the disk. We create one file per certificate component (certificate, key, chain and root)

Troubleshooting

If something is wrong, like the istiod pods not starting, check in the logs:

Pod is failing during Init phase

Check the Vault-Injector logs in the istiod pod:

kubectl logs -n istio-system deployment/istiod -c vault-agent-init

Pod is failing after Init

kubectl logs -n istio-system deployment/istiod -c vault-agent

istiod process is crashing

If the certificate is not working, the Vault-Injector will work but istiod will not be able to start. Check istiod logs:

kubectl logs -n istio-system deployment/istiod -c discovery